developed and Made in Europe!send package from Europe!Free shipping!

Skype:autodiag.tech

PASS-CODE Calculator for Toyota, Lexus, Scion

PASS-CODE Calculator used for programming keys for Toyota, Lexus and Scion models. Avaliable for programming used or new keys and smart-keys. Also used for Smart Code Resetting. You can use Toyota Techstream software and any OEM hardware compatible interface. This item allows you use factory procedure for programmong keys without online-service.

PASS-CODE Calculator works ONLY with USB-Key.

Supported software versions Toyota Techstream:

9.30.029
9.30.002
9.20.022
9.20.021
9.10.038
9.10.037
9.00.026
9.00.025
8.30.023
8.20.019
8.11.006
8.10.021
8.00.034

Instructions how to use PASS-CODE Calculatror

Smart Code Reset:
1. Connect to the vehicle:

2. Select Division, Model, Year, Engine and specify Options:

3. Select ECU Smart Key for Smart resetting:

4. Click for Utility:

5. Then choose Smart Code Reset in Utility Selection Menu:

6. Make sure driver door is open. Other doors must be closed. Don't touch
steering wheel and pedal.
ATTENTION! Smart Code Reset utility will erase all smart codes in vehicle!

7. Click Pass-Code button and copy Seed Number to clipboard. Not need to
use Toyota Online.

8. Open PASS-CODE Calculator. Paste VIN vehicle, Seed Number and press
Calculate. You will get Pass-Code Number. Paste Pass-Code, click "Next"
and confirm:

9. Smart Code Reset will start. Wait for 16 Minutes for Smart Resetting. Then
use one of the Toyota factory procedure for programming keys.

Smart-Key Programming procedure:
(Example, when ID Code Box and Smart ECU had replaced. Smart Code
Reset must be performed!)

1. Select Smart Code Registration in Utility Selection Menu and press Next:

2. Choose third point and press Next:

3. Program keys. To register key touch the Power/Engine Switch with the key
– you will hear a signal, and then move the key to the center of car cabin –
you will hear a signal once again. To register second, third key, etc. – just
repeat "touch and move" operations. You have 30 seconds to do this.

4. Smart Code Registration is complete.

IMPORTANT! You can use this Smart Code Registration procedure even ID
Code Box and Smart ECU had not been replaced. Both for new and used
smart-keys.

EXTRA: PASS-CODE Calculator works only with USB key.

Skype:autodiag.tech